A User’s Guide to Waterstones

Synopsis: The more proficient you are at sharpening a blade, the more likely you are to keep your tools sharp. And sharp tools will help you raise the quality of your projects. In this article David Charlesworth shares his time-tested method for sharpening with waterstones. To get the most from waterstones, a disciplined approach to using, maintaining, and storing them is essential, and Charlesworth’s technique requires minimal effort.

Sharpness is a function of two polished surfaces meeting to form a cutting edge. The easier and quicker it is to polish these edges, the more likely you are to keep your tools sharp, and sharper tools will raise the quality of your woodworking projects.

My preferred method of sharpening is to use Japanese synthetic waterstones, and I recommend them to my students. They cut faster and give a better edge than most other sharpening systems. The grit size of an 8,000-grit stone is about 3 microns, meaning that scratches left by it may be no more than 1.5 microns deep. This is a much better polish than you get with alternatives such as translucent Arkansas, ceramic, or diamond stones.

The cost of a set of synthetic stones is less than that of most other sharpening systems. A basic set of stones—800 grit, 1,200 grit, and 6,000 grit with a Nagura honing stone—costs around $75. Substitute an 8,000-grit stone for a slightly finer polish, and the cost is still well under $100.

To get the best from these stones, a disciplined approach to both using and maintaining them is essential. I have developed a time-tested method for sharpening that requires minimal effort.

I store the coarser 800-grit and 1,200-grit stones on their sides in plastic trays of shallow water. A dash of household bleach can be added to the water to slow down the growth of mold. Don’t store your stones in water if your workshop freezes at night, because the stones will shatter. Stones stored dry will be ready to use after a five-minute soak. Stones of 4,000 grit and finer always are stored dry and sprayed with water only prior to use.

My sharpening station also includes a simple stone-flattening device: 1⁄2-in.-thick float glass attached to a Corian base that drains the sludge back into the sink.

Because waterstones are designed to erode with use, in the hands of the inexperienced they quickly can develop a hollow profile. My sharpening technique minimizes hollowing, which is particularly helpful when flattening the backs of new plane and chisel blades. There are two types of stroke, the lengthwise stroke and the crosswise stroke, which refer to the orientation of the stone rather than the blade. Lay the blade across the 800-grit stone with its edge about 1⁄2 in. off the left edge of the stone.

From Fine Woodworking #169

For the full article, download the PDF below.

Fine Woodworking Recommended Products

Tite-Mark Marking Gauge

These gauges can be easily and precisely adjusted with one hand, which allows you to set the tool while holding a ruler or workpiece in the other. The quality is exceptional, and all have sharp cutters that offer great visibility.

Buy at Lie-Nielsen Toolworks

Rockler Silicone Sharpening Stone Tray

At 6 in. wide, with plenty of length for standard waterstones, they have grippy dimples that keep the stones stable and level, plus wide channels all around to catch the water. They also lock together, side by side, so I can have all of my stones available at the same time.

Buy at Rockler

Bahco 6-Inch Card Scraper

The size and thickness are what matter here. A consistent performer, this Bahco scraper is found in many shops we visit.

Buy at Amazon