September 29, 2020
Blending the traditional four-post bed design with that of the modern platform bed, Peter Lutz designed an elegant bed with an elevated base, angled headboard, and turned legs set in from the corners.
April 6, 2020
Jeremy Zietz gives this Shaker classic new panache with tapered facets, beveled cutouts, and ebonized ash.
April 2, 2018
Whether it's for bed hardware or floating tenons, mortising long boards isn't easy
March 20, 2018
Updated design combines solid walnut with veneered panels
September 14, 2017
In the conclusion on this video workshop, Kevin puts on a show tackling a very difficult glue-up solo, and finishing it all of by assembling the bed with specialty bed hardware.
August 3, 2017
Armed with the perfect templates, Kevin starts routing the inlay channels on the complex headboard inlay
July 27, 2017
In this episode, Kevin gets started on the inlay by making banding out of maple, and most importantly, creating the templates that will be used throughout the inlay process
July 20, 2017
In this episode, Kevin adds the tenons to the bed panels and side rails using the tablesaw and bandsaw
July 6, 2017
In this episode, Kevin makes the template he’ll use to curve the top rails, cuts mortises in the rails, puts tenons on the end, and finally adds the curves using the bandsaw and router
June 29, 2017
After cutting the mortises on a hollow-chisel mortiser, Kevin shapes the posts of this bed using a bandsaw, sander, and block plane
UNLIMITED membership - Get access to it all
© 2020 The Taunton Press, Inc. All rights reserved.
Become an UNLIMITED member and get it all: searchable online archive of every issue, how-to videos, Complete Illustrated Guide to Woodworking digital series, print magazine, e-newsletter, and more.