Turn a Block Plane into a Chisel Plane

For tasks like trimming wood plugs or removing dried glue in corners, I’ve wanted a chisel plane for a long while. I know they are available commercially, but I had a brainstorm when looking at a broken-down block plane in my parts pile: “Why not just cut the toe off of this?”

I took a hacksaw and made a curving cut, ending at the back of the mouth. Then I used a bench grinder to round the edges, and a smooth-cut mill file to refine the shape further and remove burrs. I lapped the sole flat on sandpaper and stones and honed the iron, and my shopmade chisel plane works wonderfully. By the way, my original beat-up block plane was a Stanley-Bailey 12-960 low-angle model, which is also available new for under $40, so that’s the most you’ll have to spend.

—BRYAN KOPPERT, Loudonville , Ohio

Fine Woodworking Recommended Products

Marking knife: Hock Double-Bevel Violin Knife, 3/4 in.

This heavy, double-beveled knife stays on track in all directions, and works just fine without adding a handle.

Buy at Lee Valley

Veritas Precision Square

This precision square is incredibly versatile, from checking squareness to dialing in machine setups.

Buy at Lee Valley

Lie-Nielsen No. 102 Low Angle Block Plane

With smooth, precise adjustments and wonderful balance, this compact block plane is a joy to use. It doesn’t have any bells and whistles, but there’s not a better block plane available for the money.

Buy at Direct