Beds - Page 2 of 4 - FineWoodworking

Ep 6: Inlay Prep — Creating the Banding and Templates

July 27, 2017

In this episode, Kevin gets started on the inlay by making banding out of maple, and most importantly, creating the templates that will be used throughout the inlay process

Ep 5: Bed Panels & Rails

July 20, 2017

In this episode, Kevin adds the tenons to the bed panels and side rails using the tablesaw and bandsaw

Ep 3: Headboard & Footboard Rails

July 6, 2017

In this episode, Kevin makes the template he’ll use to curve the top rails, cuts mortises in the rails, puts tenons on the end, and finally adds the curves using the bandsaw and router

Ep 2: Shaping the bed posts

June 29, 2017

After cutting the mortises on a hollow-chisel mortiser, Kevin shapes the posts of this bed using a bandsaw, sander, and block plane

Ep 1: Introduction to Kevin Rodel’s Arts and Crafts Bed

June 29, 2017

Designed after a four-post bed by Gustav Stickley, this queen-size version features a Glasgow-style inlay and can be adapted to suit any mattress height. The construction is mortise-and-tenon, the posts…