Antique Pine Washstand
Antique Pine Washstand built from re-claimed pine rafters from 18th century, greek revival. St. Charles Ave, New Orleans La, Damaged durring hurricane Katrina.
Fine Woodworking Recommended Products
Metabo HPT RP350YDH HEPA Dust Extractor
- Initial static pressure (in. of water): 78 - Static pressure with bag 2/3 full: 75 - Noise level (db): 80 - Disposable filter bags (5 pack): $70 - Reusable bag avail. from mfr.: No - Hose length (ft): 11 - Cord length (ft): 24
Oliver 12-1/2" Thickness Planer with BYRD Shelix Cutterhead and Wixey DRO
Maximum Stock Width: 12-1/2" Maximum Depth of Cut: 5/64" & 3/64" Maximum Stock Thickness: 6" Minimum Stock Thickness: 5/32" Minimum Stock Length: 5" Dust Port Diameter: 2-1/2" or 4" Feed Speeds: 26 FPM Table Size: 12-1/2" x 10-5/16" Table Size w/Extension Wings: 12-1/2" x 33-3/16" Cutterhead Diameter: 1-7/8" Cutterhead Speed: 10,000
Tried & True Original
For the ultimate warmth, glow, and clarity, in a hard-wax oil, Adam Godet recommends Tried & True Original. To get there, however, you’ll need to buff it between coats.
Chicago Electric Belt Sander
Weight: 7 lb. Amps: 6 Variable speed: Yes Belt alignment: Good Material removal rate: Fair Sanding flatness: Very good Shaping/scribing: Good Handling on side: Very good Dust collection with hose: N/A
Metabo HPT C12RSH2 Miter Saw
This saw has a similar design to the best overall Makita, but it falls short because of small details that add up. First and foremost are the poor ergonomics. I find vertical handles cumbersome. The bevel lock was frustrating too. The tilt lever was at the back of the saw, meaning the tool can’t sit tight to the wall. There are no bevel detents. It’s the only saw without a flip stop, meaning you have to reset it between cuts. Still, the saw has a compact design, and it’s the most affordable of the bunch. The side extension arms have slick levelers, too.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
-
Antique Pine Washstand
-
Antique Pine Washstand, unfinished
Log in or create an account to post a comment.
Sign up Log in