Synopsis: The low Roman workbench is the oldest and simplest form of bench, and it has advantages many woodworkers have overlooked. For one, it allows you to sit while working, which is perfect for those with mobility problems. You can also use your body as leverage when planing, sawing, or shaping. You can disassemble it and bring it with you in the car. And it can even serve double duty as a coffee table or sitting bench if you have a small space.

---

When woodworkers decide what type of workbench to build, few consider the oldest and simplest form: the low Roman workbench. This humble and ancient bench has many advantages that are usually overlooked. I spent years researching this type of bench, traveling to see them, building them, and using them. I’ve written a book about these benches, Ingenious Mechanicks: Early Workbenches & Workholding (2018, Lost Art Press). The book goes into the history, building, and using of the benches, a poem about wood species selection, and a ton more. This article will give you the highlights.

Even today, the low bench survives in many woodworking cultures. I’ve seen luthiers in Brazil and coopers in Estonia who still prefer a low workbench. In fact, once you know what they look like, you’ll start seeing them in barns and old garages, especially in rural areas.

You see, the low Roman workbench never really went away. We simply forgot about them here in the West (Chinese woodworkers still use low benches today). After almost a decade of working on them, I think the early workbench is a form worth reviving.

Why a low bench

First, you get to sit down when you work and use your body as leverage when shaping pieces. I’ve heard from many woodworkers with mobility problems who switched to a Roman workbench, allowing them to continue building furniture, even if they have trouble standing. If you don’t have a mobility problem, consider that sitting while you work conserves energy, allowing you to work longer.

The low bench can also do double-duty as a sitting bench or coffee table in an apartment workshop. I’ve heard from dozens of woodworkers who say the Roman bench allows them to work in places where a full-size stand-up workbench won’t fit.

Finally, you can take it with you on trips. Knock the legs out of their mortises and throw it in the car when you head to the lake. Wedge up the legs (no glue) when you get to your destination.

Using a low bench

Even though I own several standard workbenches, I use a low Roman workbench for many operations, including shaving spindles, planing the faces of boards, sawing boards to length, and even applying a finish to pieces such as chairs and small pieces of casework.

I typically build these benches out of construction lumber, though I have also used red oak for a few. The tops are made from 8/4 lumber—11 in. wide by 6 ft. long is typical. The benchtop is usually about 18 in. off the ground, which makes it ideal for sitting and handsawing.

The workholding is simple. I have a square mortise at one end that can receive a couple different blocks: one that works as a planing stop, the other that is great for shaving spindles and accurate crosscuts. Plus, the top has some holes for holdfasts or pegs.

If you have a threadbox, you can even make a simple face vise (like the one in the photo, top) which is ideal for holding chair seats as you shape their edges.

Watch it in action

Join Christopher Schwarz and Roy Underhill of The Woodwright’s Shop as they unlock the secrets of the ancient Roman woodworker’s bench.

Video hosted by PBS. May be unavailable in some areas.

---

 

Christopher Schwarz is a furniture maker and writer in Covington, Ky.

Photos, except where noted: Christopher Schwarz

From Fine Woodworking #307

To view the entire article, please click the View PDF button below.

 

Fine Woodworking Recommended Products

Bahco 6-Inch Card Scraper

The size and thickness are what matter here. A consistent performer, this Bahco scraper is found in many shops we visit.

Buy at Amazon

Tite-Mark Marking Gauge

These gauges can be easily and precisely adjusted with one hand, which allows you to set the tool while holding a ruler or workpiece in the other. The quality is exceptional, and all have sharp cutters that offer great visibility.

Buy at Lie-Nielsen Toolworks

Starrett 4" Double Square

Head is easy to remove, replace, and lock down; narrowest blade, at 5⁄8 in., made it easier to fit into tight places; hard to read under bright lights.

Buy at Woodcraft Buy at Amazon

View PDF