The Delta is a good, solid machine with lots of power. It leaves an excellent finish surface. The machine includes two feed speeds. The low feed speed setting increases the cuts per inch creating a better surface. Blade changes are easy. My two picks for best overall are the DeWalt 735 and the Craftsman 21759. The Delta 22-580 and Steel City planers were just behind these two leaders.

Photo: Anissa Kapsales

January 2003 (Issue #160) Review by Lon Schleining

Today’s thickness planers vary in price from less than $300 to nearly $500. In an effort to learn whether the price differences reflect the quality and features of the machines, I put nine of them through a hands-on test. To begin with, it’s important that the infeed and outfeed tables be flush with the bed, and I found that all of these machines made it easy to adjust the tables up and down. In addition, I tested how accurately and smoothly the planers cut (all produced amazingly smooth cuts). I also measured the noise level of the machines, checked to see how easy it was to change knives, and gauged the effectiveness of the dust collection.

The Delta is expensive, and it’s the heaviest of the lot. It had excellent carriage parallelism, the best dust collection, and was one of the least noisy. It also tied for the smallest amount of snipe. It has slotted knives and two cutting speeds.

Fine Woodworking Recommended Products

Grizzly G0495X Industrial Helical Cutterhead 8-in. Jointer

Regardless of the board’s grain, this jointer produced excellent results. Its fence was totally flat, worked smoothly, and locked well, staying in place even after jointing multiple edges. Getting the fence to 90° was very easy, but the 90° stop was a little tricky to set and the fence did not go back to square when using it. For those who would use it, there is also a digital depth-of-cut scale.

Buy at Amazon

Shop Fox W1826

The thick, felted bag on this Shop Fox is a plus and a minus. On one hand, it makes the unit much less expensive than collectors with canister filters, and also lighter and easier to hang on the wall. Without a separate plastic bag to catch chips, however, they stay in the felt bag, and the shortish zipper on the bottom makes it tough to shake them out. Otherwise, the W1826 is an excellent value.

Buy at Amazon

DeWalt 735X Planer

At high speed, the planer works fast and leaves a smooth surface. But the slower, finish speed produces an almost glass-smooth surface. Knife changes are easy.

Buy at Amazon