A modest, portable dust collector can do a good job provided you fit it with an effective filter and don’t treat it like a true central dust-collection system with long runs of ductwork. To be effective, a portable dust collector must move air fast enough to transport big chips, shavings, and dust; move enough air to capture all the waste that woodworking machinery generates; and trap even the finest dust particles. But without a first-class filter, a dust collector becomes a dust-recirculating pump, spewing contaminated air throughout the shop.

The 10 collectors tested are about the most powerful type available that run on normal 120v household current. They have a 1.5-hp motor driving an impeller to suck dust into the filter and the collection bags. They’re designed to handle the waste from a typical shop machine but not from two machines at once. As a practical matter, a dust collector needs to provide 800 cfm or more to move all the dust, chips, and shavings that machines like tablesaws, jointers, and planers produce.

The General performed well. It comes with a 2-micron bag (it previously came with 30-micron filter bag and a 2-micron bag for an extra $55), and a 1-micron cartridge filter. A remote on-off switch is an extra $100.

Fine Woodworking Recommended Products

Grizzly G0495X Industrial Helical Cutterhead 8-in. Jointer

Regardless of the board’s grain, this jointer produced excellent results. Its fence was totally flat, worked smoothly, and locked well, staying in place even after jointing multiple edges. Getting the fence to 90° was very easy, but the 90° stop was a little tricky to set and the fence did not go back to square when using it. For those who would use it, there is also a digital depth-of-cut scale.

Buy at Amazon

Shop Fox W1826

The thick, felted bag on this Shop Fox is a plus and a minus. On one hand, it makes the unit much less expensive than collectors with canister filters, and also lighter and easier to hang on the wall. Without a separate plastic bag to catch chips, however, they stay in the felt bag, and the shortish zipper on the bottom makes it tough to shake them out. Otherwise, the W1826 is an excellent value.

Buy at Amazon

Freud Super Dado Saw Blade Set 8" x 5/8" Bore

Leaves a dado with a flat bottom and even performs excellent on plywood and melamine.

Buy at Woodcraft