Fine Woodworking

Inlay And Veneering

STL238: Tim Coleman’s shopsawn veneer secrets–revealed!

April 9, 2021

Fine, they weren't secrets, but Tim sits down with Mike and Ben and the conversation goes deep into veneering processes.
Video: Marquetry in motion

April 6, 2021

Look over Craig Thibodeau’s shoulder, and watch him assemble a marquetry panel. He makes it look easy.
Gilding 101: Finishing with Real Gold

August 21, 2020

Frame maker Barrie Bryant gives a glimpse into the gilding process and the tools and techniques he uses to create his beautiful gilded frames.
D.I.Y. precision router base for rotary tools

August 6, 2020

Ben Strano makes a rotary tool base perfect for detailed inlay work for less than $5.
Veneered Boxes Made Easy

June 23, 2020

Veneering pro Craig Thibodeau shows how to make a mitered, veneered box that he describes as simple but that looks anything but.
Ep 18c: Trimming a kumiko panel to size

April 7, 2020

Finishing off the panel, Mike trims it to size, and adds a paper backer to the kumiko panel.
Ep 18b: Kumiko–Asa No Ha pattern part 2

April 7, 2020

In part two of this episode, Mike begins placing the kumiko pieces into the grid, creating the beautiful latticework.
Ep 18a: Kumiko–Asa No Ha pattern part 1

April 7, 2020

In part 1 of three part episode, Mike uses specialized paring blocks to create the parts that will fill in the decorative kumiko panel.
Ep 11: Sizing the kumiko grid

February 18, 2020

Using a tablesaw sled, Mike creates the grid for the decorative kumiko which will then tell him the dimensions of the door.
Veneered waterfall edging

February 6, 2020

Craig Thibodeau demonstrates how to create crossgrain banding that starts on the face of a panel and flows outward, away from center, and over the edge.

No results found.