This one has the dimensions of a Stanley 5.25, more or less – length 12 inches, width 2 3/8 inches. The iron is 1 3/4 inches wide, pitched at 45 degrees. The infill is English walnut ebonized via the steel-wool-in-vinegar method.
Fine Woodworking Recommended Products
Shop Fox W1826
The thick, felted bag on this Shop Fox is a plus and a minus. On one hand, it makes the unit much less expensive than collectors with canister filters, and also lighter and easier to hang on the wall. Without a separate plastic bag to catch chips, however, they stay in the felt bag, and the shortish zipper on the bottom makes it tough to shake them out. Otherwise, the W1826 is an excellent value.
Especially considering the price, among the lowest of the bunch, the Ridgid R4222 has impressive adjustability. It has the largest crosscut capacity of all the saws. And the miter and bevel settings have the largest range of travel, and a bevy of detents. However, the power switch is clumsy, a bad design especially for lefties. The adjusters are either hard to use or hard to reach. Plus, its slider needs the most room out of any of the saws.
Spacing: Fixed Stock width (max.): 11 in. Stock thickness: 1/2 in. to 3/4 in. for through-dovetails (pins board can be up to 1-1/8 in. thick); 1/2 in. to 3/4 in. for half-blinds Half-blind depth: 5/16 in.
- Stock removal was poor - Dust collection was near the bottom without a vacuum, but very solid with one - Roomy waist leaves plenty of options for gripping
With its graceful curves, cabriole legs, and ornamental back splat, a Queen Anne side chair is a bucket list build for many woodworkers. Dan Faia had a very specific Queen…
Become an UNLIMITED member and get it all: searchable online archive of every issue, how-to videos, Complete Illustrated Guide to Woodworking digital series, print magazine, e-newsletter, and more.
Log in or create an account to post a comment.
Sign up Log in