This cherry-and-ash cabinet was designed in collaboration with Sandra Ramsey Assoc. The clients presented a poor photocopy of a case that had a silver, corduroy-like surface. On the shallow flutes of Patrick’s interpretation, he eliminated tarnishing issues by substituting palladium leaf for silver leaf. The ash borders around the doors and aprons are ebonized, and the rest of the piece is finished with CAB (cellulose acetate butyrate) lacquer.
Photo: Jeffrey Patrick
Fine Woodworking Recommended Products
Jorgensen 6 inch Bar Clamp Set, 4 Pack
Small light-duty clamps are best bought in quantity. These clamps are a great balance of affordability and quality—so stock up!
The Delta was another model that you can locate close to a wall. It employs dual articulating arms that save space while yielding good, wide cuts provided you use good technique. The saw is tied for the second-shortest overall footprint. The Delta’s ergonomics were a treat too. Thanks to convenient placement and ease of use, the locks for the miter and bevel stops were superb. Its LED results in a nice, accurate shadow. The dust collection was just slightly lower than the Makita’s, but still quality for a miter saw.
- Stock removal was poor - Dust collection was near the bottom without a vacuum, but very solid with one - Roomy waist leaves plenty of options for gripping
One of only two machines with a cutterhead perfectly parallel to its beds, the DeWalt 734 is a very good planer. Knife changes overall were straightforward, but access is difficult because you must remove a Phillips-head screw from under the dust shroud—not an easy task. The dust port on the back of the machine has a 2-1/2-in.-dia. opening but can be hooked up to a 4-in.-dia. hose. Connected to a dust collector, it did an excellent job gathering chips. And because the port exits to the left of the machine, the hose is never in the way of exiting boards. The top of the machine is flat, making it a good place to stack boards between passes.
With its graceful curves, cabriole legs, and ornamental back splat, a Queen Anne side chair is a bucket list build for many woodworkers. Dan Faia had a very specific Queen…
Become an UNLIMITED member and get it all: searchable online archive of every issue, how-to videos, Complete Illustrated Guide to Woodworking digital series, print magazine, e-newsletter, and more.
Log in or create an account to post a comment.
Sign up Log in