Incredibly useful for laying out, setting equal distances, and comparing measurements, these are an essential tool for any furniture maker.

One of the most versatile accessories to have in the shop: from layout to seaming veneer. It has enough stretch to pull joints together.

One of only two machines with a cutterhead perfectly parallel to its beds, the DeWalt 734 is a very good planer. Knife changes overall were straightforward, but access is difficult because you must remove a Phillips-head screw from under the dust shroud—not an easy task. The dust port on the back of the machine has a 2-1/2-in.-dia. opening but can be hooked up to a 4-in.-dia. hose. Connected to a dust collector, it did an excellent job gathering chips. And because the port exits to the left of the machine, the hose is never in the way of exiting boards. The top of the machine is flat, making it a good place to stack boards between passes.

Set includes solid carbide down-cut spiral bit (for chip-free cutting), quick-change bushing, template guide and complete instructions. Fits Porter-Cable, Black & Decker and any router with a Porter-Cable bushing adapter.

A wheel-type gauge is the easiest to use, and this wonderful Veritas model is a steal at $38.