Sash saw Makes Fast, Clean Cuts

All of the large tenon saws I’ve used are heavy and cut with a wide kerf. But the Gramercy Tools 14-in. sash saw has qualities not found in other big saws. It is light (for a big saw), cuts with a thin kerf, and is very well balanced. It excels at cutting tenons and large joinery. What really makes this saw stand out from other tenon saws are its teeth, which are a hybrid of rip- and crosscuts. The hand-filed and hammer-set teeth cut quickly when ripping, but still cut smoothly and cleanly when crosscutting. The saw has 13 tpi, which is aggressive enough to get through tenons in short order but still start easily.

I also like that the saw’s plate tapers in height from the heel of the saw to the toe. This design reduces weight, enhances balance, and enables the saw to cut more aggressively because each tooth is slightly lower than the preceding one. The walnut handle is elegant and comfortable.

More on FineWoodworking.com:

• Saw Slotting Simplified
• Dovetail Saws – To cut dovetails by hand, you need a fast cutting saw that’s easy to control
• Cutting with a Dovetail Saw – Watch a demonstration of cutting techniques that lead to tight-fitting joints

Fine Woodworking Recommended Products

Bahco 6-Inch Card Scraper

The size and thickness are what matter here. A consistent performer, this Bahco scraper is found in many shops we visit.

Buy at Amazon

Suizan Japanese Pull Saw

A versatile saw that can be used for anything from kumiko to dovetails. Mike Pekovich recommends them as a woodworker's first handsaw.

Buy at Amazon

Starrett 4" Double Square

Head is easy to remove, replace, and lock down; narrowest blade, at 5⁄8 in., made it easier to fit into tight places; hard to read under bright lights.

Buy at Woodcraft Buy at Amazon