The author looked at 13 popular 3-hp, 220v 10-in. cabinet saws. In addition to evaluating the saws for power and safety, he also tested for tabletop flatness, for runout at the arbor shaft and arbor flange, and for parallelism of the blade to the miter slot. He found that all the saws offered plenty of power, solid rip fences, smooth controls, and flat tabletops. The General 650-T50 M2 has a U.S.A.-made Baldor motor and the lowest arbor runout in the test group. An extension table and legs are optional.
Fine Woodworking Recommended Products
Ridgid EB4424 Oscillating Spindle/Belt Sander
With five spindles sized from 1/2 in. to 2 in. and a 4 X 24-in. belt, this sander has become a staple in many a shop Fine Woodworking visits.
Regardless of the board’s grain, this jointer produced excellent results. Its fence was totally flat, worked smoothly, and locked well, staying in place even after jointing multiple edges. Getting the fence to 90° was very easy, but the 90° stop was a little tricky to set and the fence did not go back to square when using it. For those who would use it, there is also a digital depth-of-cut scale.
With its graceful curves, cabriole legs, and ornamental back splat, a Queen Anne side chair is a bucket list build for many woodworkers. Dan Faia had a very specific Queen…
Become an UNLIMITED member and get it all: searchable online archive of every issue, how-to videos, Complete Illustrated Guide to Woodworking digital series, print magazine, e-newsletter, and more.
Log in or create an account to post a comment.
Sign up Log in