Tools & Materials
Generic - Boiled Linseed Oil
The old favorite, boiled linseed oil, takes about a day to dry and produces a flat-sheen finish.
Aug 01, 2005
The author tested 15 wipe-on finishes, including a water-based finish and both tung-oil and linseed-oil-based finishes. Pure boiled linseed oil and Minwax Fast-Drying Polyurethane, a brushing finish, were added for comparison. All the finishes were tested on pieces of red-oak plywood cut from the same sheet. The old favorite, boiled linseed oil, took a full day to dry and resulted in a finish with a flat sheen and poor water resistance.
Fine Woodworking Recommended Products
Starrett 12-in. combination square
This accurate, robust, well-machined, easy-to-read combo square is as great as ever.
Rockler Deluxe Panel Clamp
These clamps can handle glue-ups between 10 in. and 36 in. wide, and boards up to 3 in. thick. Sliding feet attach to the lower bars with magnets, letting you position them quickly for stability on any surface. The spring-loaded jaws adjust easily, dropping into notches along the bars. And the powerful clamp handles clear the benchtop.
Veritas Micro-Adjust Wheel Marking Gauge
The adjuster runs through the beam from a small knob at the back end right to the cutting wheel, which moves in and out as you turn the knob. This arrangement works well but makes adjustments a two-handed operation, requiring a little more effort.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
Log in or create an account to post a comment.
Sign up Log in