If you cut a lot of thick stock, or if you resaw stock in the 9-in.-wide to 12-in.-wide range, an 18-in. bandsaw is worth considering. Not only does it offer extra capacity, but most 18-in. saws also have more horsepower to cut faster. I looked at 11 models ranging in price from $900 to almost $3,000, evaluating cutting ability, machine sturdiness, and blade-changing ease. The Laguna did well in the curve-cutting test, was second-best in resaw speed, and had the highest resaw capacity by far. It has the best guides, and blade changing was relatively easy. The cast-iron trunnion support and steel trunnions are a plus. This model has a very good rip fence, but it had the second-lowest rip capacity. It ranked sixth in the frame-deflection test.

Fine Woodworking Recommended Products

Freud Super Dado Saw Blade Set 8" x 5/8" Bore

Leaves a dado with a flat bottom and even performs excellent on plywood and melamine.

Buy at Woodcraft

JessEm Mite-R Excel II Miter Gauge

The gauge has a quick and easy method for fitting the guide bar precisely to your tablesaw’s miter slot. This means the gauge can be recalibrated if necessary for continued accuracy. The face of the protractor head can be adjusted square to the table and also square to the guide bar. This ensures accurate cuts, and it, too, can be readjusted if the need arises. The protractor head has stainless-steel knobs and fittings and high-contrast, easy-to-read white numbers and increments.

Buy at Amazon

Oneida’s Super Cell Dust Collector

30-Gal with Wall Mount

Buy at Amazon