To test bandsaw blades for resawing, we selected 1/2-in.-wide blades, a size well suited to resawing on a 14-in. bandsaw. The same saw (Delta model 28-241) was used for all of the tests. When it comes to resaw blades, most woodworkers have only three demands: that the blade be reasonably fast and that the cut be both reasonably flat and reasonably smooth. To measure speed, we timed low long it took to cut through a section of  9-1/2-in.-wide soft maple, with short times equating to fast-cutting blades. To measure flatness, we measured the amount of barreling on the test block using a straightedge and a set of feeler gauges. To find the smoothest cutters, we measured how much sanding had to be done to remove the blade marks. The BC Saw blade’s flat, smooth cut combined with its low price earned it our Best Value award.

Fine Woodworking Recommended Products

Ridgid EB4424 Oscillating Spindle/Belt Sander

With five spindles sized from 1/2 in. to 2 in. and a 4 X 24-in. belt, this sander has become a staple in many a shop Fine Woodworking visits.

Buy at Amazon

Festool Cleantec CT 26 E HEPA Dust Extractor

The clear winner here is Festool’s CT 48 Dust Extractor. It has amazing capacity relative to its size, and unmatched suction power. It packs in a number of subtle but very helpful design touches, like a clever foot brake and easy hose and cord storage.

Buy at Amazon

Grizzly G0495X Industrial Helical Cutterhead 8-in. Jointer

Regardless of the board’s grain, this jointer produced excellent results. Its fence was totally flat, worked smoothly, and locked well, staying in place even after jointing multiple edges. Getting the fence to 90° was very easy, but the 90° stop was a little tricky to set and the fence did not go back to square when using it. For those who would use it, there is also a digital depth-of-cut scale.

Buy at Amazon