As anyone in the market for a combination blade, also called a general-purpose blade, knows, there’s no shortage of choices, even in the upper price range. Curious to know whether any of these blue bloods stood out, I decided to test 14 top-of-the-line 10-in. combination saw blades for smoothness of cut.

With each new blade, I ripped and crosscut a 3/4-in.-thick maple board to produce a 2-in.-square sample. After that, the ripped and crosscut edges on each sample were checked for smoothness on a high-tech machine called a surface and roughness profiling system, which can measure very small surface deviations. Then, based on the machine measurements, the smoothness of each rip and crosscut was rated as excellent, very good, good, or fair.

The Craftsman scored one of only two fairs in the rip cut and a very good in the crosscut.

Fine Woodworking Recommended Products

Oneida’s Super Cell Dust Collector

30-Gal with Wall Mount

Buy at Amazon

Rikon 10-3061 10-in. Deluxe Bandsaw

The 1⁄2-hp motor has all the power needed to resaw at its maximum capacity of 5 in.

The saw has two speeds: 3,280 sfpm (surface feet per minute) for wood and 1,515 sfpm for soft metals and some plastics.

Buy at Amazon

Stanley Powerlock 16-ft. tape measure

With its smooth lock, tough case, compact size, and excellent accuracy, this Stanley tape is perfect for workshop use.

Buy at Amazon