Subscribe now and save up to 56%
June 1, 2016
It is difficult to drill a perfectly centered hole in the end of a round dowel, but this drill guide solves the problem. Choose a Forstner bit the same size…
July 29, 2015
Most drill presses have a depth stop that uses two jam nuts on a threaded rod. This works fine, but it requires two wrenches to make adjustments.An easier and faster…
January 28, 2015
A fence and stop block come in handy when drilling identically placed holes in multiple pieces and securing your work safely. This simple drillpress fence works great. It’s made from…
December 3, 2014
Low-cost jig produces basic cabinetry joinery that's easy and strong
A router and three jigs are all that's required to fit lock-sets precisely
April 1, 2014
Create custom door and drawer knobs using your drill press
June 6, 2013
Here is an improvement on the standard shelf-pin drilling jig. It uses a plunge router with a spiral carbide bit to make clean holes for shelf pins in the sides…
December 30, 2009
Learn how to build a shelf pin drilling jig that's easy to use and dead-on accurate.
April 1, 2009
This quick-to-make drill-press fence is a big improvement over the clumsy strip of wood and two clamps that most of us use. The fixture consists of a 3/4-in.-thick plywood auxiliary…
July 17, 2008
This shelf, made from 3/4-in.-thick Baltic-birch plywood, keeps bits and other accessories for my drill press close by and prevents them from rolling off onto the floor.After cutting the tray…
© 2016 The Taunton Press, Inc. All rights reserved.
Become a member and get instant access to thousands of videos, how-tos, tool reviews, and design features.
Start your subscription today and save up to 56%