Gallery
chest of drawers
Dec 24, 2010
This chest of drawers is my own design. Built with yellow birch. It has dovetailed drawers, stretchers, and the mouldings around the sides slip onto a segmented dovetailed spline to allow for seasonal movement. finished with tung oil varnish, several coats of home brew wipe on poly. The finish was leveled with steel wool then was was applied.
Fine Woodworking Recommended Products
Oliver 12-1/2" Thickness Planer with BYRD Shelix Cutterhead and Wixey DRO
Maximum Stock Width: 12-1/2" Maximum Depth of Cut: 5/64" & 3/64" Maximum Stock Thickness: 6" Minimum Stock Thickness: 5/32" Minimum Stock Length: 5" Dust Port Diameter: 2-1/2" or 4" Feed Speeds: 26 FPM Table Size: 12-1/2" x 10-5/16" Table Size w/Extension Wings: 12-1/2" x 33-3/16" Cutterhead Diameter: 1-7/8" Cutterhead Speed: 10,000
Chicago Electric Belt Sander
Weight: 7 lb. Amps: 6 Variable speed: Yes Belt alignment: Good Material removal rate: Fair Sanding flatness: Very good Shaping/scribing: Good Handling on side: Very good Dust collection with hose: N/A
Festool Model KS 120 REB Miter Saw
Sliding compound miter saws have become a woodshop staple. Their ability to squarely crosscut wide boards and to cut difficult miter and bevel angles is huge. Festool’s Kapex KS 120 REB fulfills these duties with aplomb. The design keeps the saw close to the wall, allowing for a small footprint. The cut is rigid and precise provided you use good technique. It accepts 20mm blades, about 10 1⁄4 in. Its maximum width of cut is 12 in..
Ridgid Oscillating Spindle
With five spindles sized from 1/2 in. to 2 in. and a 4 X 24-in. belt, this tool sander has become a staple in many a shop Fine Woodworking visits.
Waterlox Original
Versatile wiping varnish is easy to apply and great for both satin and gloss finishes.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
Comments
Nicely done!
Log in or create an account to post a comment.
Sign up Log in