I used “Bench Dog” Top and Fence, and my Cabinet Design was based on other designs and projects I found on the internet.
Fine Woodworking Recommended Products
MicroJig Grr-ripper2 Go
Introducing the Grr-ripper2 Go from Microjig! This innovative tool protects your hands and fingers from cuts and injuries while working with the table saw.
One of only two machines with a cutterhead perfectly parallel to its beds, the DeWalt 734 is a very good planer. Knife changes overall were straightforward, but access is difficult because you must remove a Phillips-head screw from under the dust shroud—not an easy task. The dust port on the back of the machine has a 2-1/2-in.-dia. opening but can be hooked up to a 4-in.-dia. hose. Connected to a dust collector, it did an excellent job gathering chips. And because the port exits to the left of the machine, the hose is never in the way of exiting boards. The top of the machine is flat, making it a good place to stack boards between passes.
Spacing: Variable Stock width (max.): 18 in. Stock thickness: 1/4 in. to 13/16 in. for through-dovetails (pins board can be 1 in.); 1/4 in. to 13/16 in. for half-blinds Half-blind depth: 7/32 in. to 3/4 in.
With its graceful curves, cabriole legs, and ornamental back splat, a Queen Anne side chair is a bucket list build for many woodworkers. Dan Faia had a very specific Queen…
Become an UNLIMITED member and get it all: searchable online archive of every issue, how-to videos, Complete Illustrated Guide to Woodworking digital series, print magazine, e-newsletter, and more.
Log in or create an account to post a comment.
Sign up Log in