Replies

1. 
   RalphBarker | Feb 08, 2011 10:07am | #1

   tables

   Sorry, no experience with Router Table Depot. But, it's easy enough to build your own table that incorporates the features you want. I'd suggest looking at the different commercially-available plates and/or lifts, paying particular attention to the insert options each provides. Some are pretty simple, others more complex, including the ability to use guide bushings. Note that all may not have pre-drilled models that will fit your router model, but it's relatively simple to drill new holes, using your router's base plate as a template.

1. 
   ATrask | Feb 08, 2011 12:55pm | #2

   Router Table

   Thanks appreciate it.

2. 
   fussy | Feb 12, 2011 06:56pm | #3

   Check out A Versitile Router Table by Kevin McLaughlin in the March/April 04 FWW.  I built this 5 years ago and have yet to find anything it won't do.  I built my own router plate of 3/8" poly carbonate (Lee Valley) and have only $30.00 or so in the whole thing.  Took about 1 1/2 days, but I'm old and slow.

   Steve