I am setting up a new shop after a long hiatus from the bark. My idea is to set up a dual dust control system consisting of the older style over and under bags for chips and fine dust, supplemented by a 4 speed exhaust blower fed to the outside thus creating a negative pressure in the workshop. I am seeking a solid state, handheld remote control transmitter and receiver that will accomodate a 10 to 15 amp blower motor.
Appreciate any assistance finding same.
Latecomer
Replies
http://busybeetools.ca/cgi-bin/product10?&NTDESC=remote
Last two items or maybe the first (?)
Edited 6/8/2007 2:10 pm ET by Piccioni
Edited 6/8/2007 2:10 pm ET by Piccioni
Not sure if this will help you or not but here is what I know:
I have a Jet Dust Dog 1.5 HP dust collector. I bought it without the remote because it was about $120 cheaper that way. I then purchased the following remote outlet set from Amazon.com:
La Crosse Technology RS-204U Remote Control Outlet System
http://www.amazon.com/gp/product/B0000CDD39/103-9444604-3624600
It shows as unavailable but you can get it on other sites if you search for the name or model number. It works very well and comes with two outlets. It cost around $35 so it was a real bargain! You can add more outlets and even other remote controls if you like. The only drawback is the size of the outlet, it will block the open outlet on a dual receptacle like a wall outlet. If you don't mind that, this is the way to go.
Hope that helps,
Joe
This forum post is now archived. Commenting has been disabled