Material thickness for FWW #216 router table
Mr. White,
(1) Looks like the plywood and MDF thicknesses are 3/4 inch. Pls confirm. Plan to build router table.
(2) Enjoyed your book “Care and Repair of Shop Machines”. Used procedures to (re) set-up tools. Very effective.
Thanks for the reply on (1).
TfB
Replies
Thanks for the compliment.
The MDF is a true 3/4" thick, the plywood was made overseas and while it might be commonly sold as 3/4" thick, it was actually closer to 11/16" thick, probably it was actually 18mm.
This forum post is now archived. Commenting has been disabled