Hi everyone, I’ve been enjoying this site for about a year and have finally deceided to sign up. Has anyone had any positive or negative feedback on the Leigh D1600 Dovetail Jig?? Cheers.
Fine Woodworking Recommended Products
Veritas Micro-Adjust Wheel Marking Gauge
The adjuster runs through the beam from a small knob at the back end right to the cutting wheel, which moves in and out as you turn the knob. This arrangement works well but makes adjustments a two-handed operation, requiring a little more effort.
Preppin' Weapon
The Preppin' Weapon allows you to use a 1/4 of a sheet of sandpaper, incredibly comfortable to use, and you can switch out sandpaper easily.
Double Sided Tape
A thin woven core makes XFasten tape strong yet not too thick (0.008 in.), and helps it hold powerfully without being difficult to peel off.
DeWALT DWXAF101 Air Filtration System
2-Stage Filtration: Includes a static cotton medium efficiency filter (cleanable) and an H11 HEPA high-efficiency filter, which can filter more than 95% of 0.3μm particles.
Festool Model KS 120 REB Miter Saw
Sliding compound miter saws have become a woodshop staple. Their ability to squarely crosscut wide boards and to cut difficult miter and bevel angles is huge. Festool’s Kapex KS 120 REB fulfills these duties with aplomb. The design keeps the saw close to the wall, allowing for a small footprint. The cut is rigid and precise provided you use good technique. It accepts 20mm blades, about 10 1⁄4 in. Its maximum width of cut is 12 in..
Replies
NO! but glad ya here just the same!
This forum post is now archived. Commenting has been disabled