Replies

1. 
   k9s | Sep 17, 2003 02:30am | #1

   Copied this from a post on Woodnet. The subject has been covered there several times, try a search on Woodnet.

   9 times out of 10 you don't need a screwdriver. See if this works:

   1) Turn the handle counter-clockwise as far as it will go.

   2) With your palm, or a mallet, bump it up (away from the bar).

   3) Pull it back.

1. 
   BobL | Sep 17, 2003 02:51am | #2

   thanks

   just got it apart but will remember this

   had the hand screw loose and a little pressure with a pry and it pooped freemy guess right now is that you need to keep that metal lever bwtween the posts, not to close to either end.bobl          Volo Non Voleo

2. 
   RANGERP75R | Sep 17, 2003 03:10am | #3

   bobl

      Just a tip I found out after much frustration. When releasing the clamp, screw it counter-clock-wise till it almost will not go any farther. Then lift the wooden handle slightly and it will release easily. Before I figured this out, I spent several minutes trying to release and get the jaws to slide back. Since, I love the Jorgy's. ha..ha..

   sarge..jt