Im just wondering if anyone is having trouble uploading some pictures onto the Gallery? I have some images that are within the parameters for uploading, but some of them have not been able to.
Update – I tried posting the photos to the gallery, and now the button to post the pictures isnt working. It’s like the feature isn’t working at all. Is anyone having trouble uploading pictures to?
Fine Woodworking Recommended Products
WoodRiver Router Bit Storage Case
Molded from high impact clear ABS, this WoodRiver® case provides a strong storage solution to keep your router bits safe and dry. The foam insert holds (36) 1/2" bits, (42) 1/4" bits, and (6) 8mm bits. The included rechargeable 150-gram desiccant bag keeps bits dry and rust free. When the window of the desiccant bag turns pink, simply place it in a microwave for 4 minutes to recharge.
Jet Air Filter AFS1000C
- Detects dust levels to adjust fan speed - Filter life is monitored and displayed on tilted LED display panel - Bright LED display shows filter life, speed, and timer settings - LED Display is angled for easier viewing when ceiling mounted - Timer can be set up to 16 hours - Automatic air quality sensor adjusts the six speeds based on air quality - Two-Filter system with air diffuser that disperses air into a broader pattern - Captures particles down to 1 micron - LED notification of filter life updated by sensor
Veritas Micro-Adjust Wheel Marking Gauge
The adjuster runs through the beam from a small knob at the back end right to the cutting wheel, which moves in and out as you turn the knob. This arrangement works well but makes adjustments a two-handed operation, requiring a little more effort.
Festool ETS EC 125/3 EQ-Plus Sander 5-in.
- Without a vacuum, stock removal was poor and dust collection fair - With a vacuum, dust collection was excellent, tock removal fair to poor - Roomy waist, but square body isn’t very comfortable - Very quick to stop
Powermatic PJ-882HH Parallelogram 8-in. Jointer
The Powermatic smoothed boards excellently. It has a plastic insert that sits shallow of the fence, where thin boards tended to catch when flattening faces. The Powermatic was the only model that uses a knob to adjust the angle of the fence—a nice feature—except that locking it caused the fence to move slightly, which made it tricky to square the fence. But when locked, the fence did not move. The 90° stop was easy to set but wasn’t reliable. The guard was finicky to install and would often not snap back fully after a board passed by.
Replies
I found out the issue. Im getting back a 502 error "Bad Gateway Error"
This forum post is now archived. Commenting has been disabled