Replies

1. 
   EdHarrow | Dec 14, 2004 05:20pm | #1

   Nice folks.  Nice chisels.

2. 
   scarfjoint | Dec 15, 2004 07:54pm | #2

   Yes, I bought a set of the cabinet makers chisel about three years ago.  I found the edges fold over at the bevel angle they come with. So, I increased the bevel to 30 degrees. It made them better, but the edges still didn't hold out under heavy chopping. I friend of mine order the same set and had the same problems. He sold his. I still use mine for lite paring and holding the garage door open.  I've heard others say just the opposite, that they hold an edge. I now alternate between high end Japanese chisels and the LNs. My LNs hold an edge unlike what I've heard a couple people say.

    

1. 
   Peter36 | Dec 15, 2004 09:48pm | #3

   You can return them inside of 1 year if not satisfied. My LN's are going back.

1. 
   scarfjoint | Dec 15, 2004 10:23pm | #4

   It's been way longer than 1 year. But, I'm satisfied with how the 1" keeps the door open, so I'll keep them. ;-)