When I built a new workbench, I liked the idea of having a tool trough on the back. But I did not want to sacrifice the table space permanently. So I came up with the idea of adding a recessed T-track to the back. This lets me add (or subtract) a tool trough or any other useful workbench accessory, such as a glue bottle holder.

The only modification I made to the standard T-track was to use longer mounting screws to ensure that the track could handle the load. The great thing about this method is that I can easily reposition or remove any workbench accessories if they get in the way in my space-limited shop.

Jim Richey

Mike Thompson, Bryan, TX

Fine Woodworking Recommended Products

Woodriver Rechargeable Desiccant Bag

Placed in a drawer, cabinet or closet, the bag immediately begins to absorb moisture from the air, which reduces corrosion.

Buy at Woodcraft

Rockler Deluxe Panel Clamp

These clamps can handle glue-ups between 10 in. and 36 in. wide, and boards up to 3 in. thick. Sliding feet attach to the lower bars with magnets, letting you position them quickly for stability on any surface. The spring-loaded jaws adjust easily, dropping into notches along the bars. And the powerful clamp handles clear the benchtop.

Buy at Amazon

Jorgensen 6 inch Bar Clamp Set, 4 Pack

Small light-duty clamps are best bought in quantity. These clamps are a great balance of affordability and quality—so stock up!

Buy at Amazon