The Benchtop Slide Mount is a heavy-duty pivoting bracket that attaches to just about any bench. A stout one-piece rail system attaches to the bottom of the bench, providing tracks for a roller assembly and swivel plate. It took less than an hour to install the bracket and bolt my bench grinder to the plate. Then I simply slid the tool forward and up on the bench, where it stayed firmly in place. The Benchtop Slide Mount works on benchtop thicknesses ranging from 1-3/4 in. to 4-1/2 in. and accepts tools weighing up to 75 lb., such as benchtop bandsaws, miter saws, and scrollsaws. It sells for $98; go to www.commercewelding.com/bench.htm  or call 800-527-5798.

Easy as one, two, three. With a tool mounted to the Benchtop Slide Mount, you can…  store the tool below your workbench… then raise it… and put it to use on top of your bench.

Fine Woodworking Recommended Products

Rockler Deluxe Panel Clamp

These clamps can handle glue-ups between 10 in. and 36 in. wide, and boards up to 3 in. thick. Sliding feet attach to the lower bars with magnets, letting you position them quickly for stability on any surface. The spring-loaded jaws adjust easily, dropping into notches along the bars. And the powerful clamp handles clear the benchtop.

Buy at Amazon

Blackwing Pencils

If you've listened to Shop Talk Live, you've heard them talk more about these pencils than you could possibly imagine.

Buy at Amazon

Bessey EKH Trigger Clamps

Bessey EKH series quick-release trigger-style clamps are simple to use and maintain consistent pressure. Trigger clamps that perform the way you've always wished they would!

Buy at Amazon