No shop vacuum has the power or longevity to replace a dedicated dust-collection system, but a number of them will work well enough as portable dust collectors for benchtop machines in small shops or as backups to larger systems. The 13 vacuums I looked at were quieter than those of a few years ago, and all had adequate power as long as I kept the filter from clogging. I found that the better performers had filters situated horizontally above the tank. Hose diameter also is critical to the function of a vacuum, particularly when the machine is used as a dust collector.  A 2-1/2-in.-dia. hose is good for planers and routers, but a small hose diameter is best for small portable tools like sanders and saws.

There are loads of accessories available for the Festool shop vac. It’s a quiet machine with a variable-speed motor.

Fine Woodworking Recommended Products

Ridgid R4331 Planer

Priced nearly $300 less than the DeWalt 735X, the Ridgid R4331 is an excellent value. Its three-knife cutterhead left wonderfully clean surfaces on plainsawn white oak and white pine. It did not perform nearly as well on curly maple as the 735X.

Buy at Amazon

Stanley Powerlock 16-ft. tape measure

With its smooth lock, tough case, compact size, and excellent accuracy, this Stanley tape is perfect for workshop use.

Buy at Amazon

Grizzly G0495X Industrial Helical Cutterhead 8-in. Jointer

Regardless of the board’s grain, this jointer produced excellent results. Its fence was totally flat, worked smoothly, and locked well, staying in place even after jointing multiple edges. Getting the fence to 90° was very easy, but the 90° stop was a little tricky to set and the fence did not go back to square when using it. For those who would use it, there is also a digital depth-of-cut scale.

Buy at Amazon