No shop vacuum has the power or longevity to replace a dedicated dust-collection system, but a number of them will work well enough as portable dust collectors for benchtop machines in small shops or as backups to larger systems. The 13 vacuums I looked at were quieter than those of a few years ago, and all had adequate power as long as I kept the filter from clogging. I found that the better performers had filters situated horizontally above the tank. Hose diameter also is critical to the function of a vacuum, particularly when the machine is used as a dust collector.  A 2-1/2-in.-dia. hose is good for planers and routers, but a small hose diameter is best for small portable tools like sanders and saws.

The three-wheeled base on this Milwaukee model shop vac was awkward at times, and the skyward exhaust port was annoying. This is a durable but noisy machine.

Fine Woodworking Recommended Products

Ridgid R4331 Planer

Priced nearly $300 less than the DeWalt 735X, the Ridgid R4331 is an excellent value. Its three-knife cutterhead left wonderfully clean surfaces on plainsawn white oak and white pine. It did not perform nearly as well on curly maple as the 735X.

Buy at Amazon

Rikon 10-3061 10-in. Deluxe Bandsaw

The 1⁄2-hp motor has all the power needed to resaw at its maximum capacity of 5 in.

The saw has two speeds: 3,280 sfpm (surface feet per minute) for wood and 1,515 sfpm for soft metals and some plastics.

Buy at Amazon

Veritas Precision Square

This precision square is incredibly versatile, from checking squareness to dialing in machine setups.

Buy at Lee Valley