Large stand-alone mortisers have been around for nearly a century, but now several manufacturers offer more affordable stand-alone models with features that make them practical for serious hobbyists and small commercial shops. Compared with the drill-press add-ons and benchtop mortisers currently on the market, these mortisers feature lots of cast-iron tables that move, sturdy hold-downs, 1-hp motors, and extralong lever handles. Curious to find out just how well these machines work, I tested seven of them.

All things considered, I was pleased to find that all seven were well made and did a decent job cutting accurate mortises, even when running a 3/4-in. bit. That puts them head and shoulders above any of the drill-press add-ons or benchtop mortisers I’ve used. So it wasn’t easy to choose a favorite.

The Woodtek, Bridgewood, Geetech, and Grizzly machines look very much alike, except for paint color. Even the owner’s manuals are identical. They use a large handwheel on the front to move the table side to side and forward and backward. The mortising head is raised with a long lever, which is pinned in place on these machines (I prefer an adjustable lever). All these machines did an adequate job boring any size mortise up to 3/4 in. Their hold-down systems worked great, the tables moved smoothly, and the stops for the table and mortise head worked satisfactorily. Bit changes were relatively easy. The Grizzly has a 110-volt motor, but you need a 240-volt circuit for the Bridgewood, Geetech, and Woodtek machines.

Fine Woodworking Recommended Products

DeWalt 735X Planer

At high speed, the planer works fast and leaves a smooth surface. But the slower, finish speed produces an almost glass-smooth surface. Knife changes are easy.

Buy at Amazon

Grizzly G0495X Industrial Helical Cutterhead 8-in. Jointer

Regardless of the board’s grain, this jointer produced excellent results. Its fence was totally flat, worked smoothly, and locked well, staying in place even after jointing multiple edges. Getting the fence to 90° was very easy, but the 90° stop was a little tricky to set and the fence did not go back to square when using it. For those who would use it, there is also a digital depth-of-cut scale.

Buy at Amazon

Ridgid R4331 Planer

Priced nearly $300 less than the DeWalt 735X, the Ridgid R4331 is an excellent value. Its three-knife cutterhead left wonderfully clean surfaces on plainsawn white oak and white pine. It did not perform nearly as well on curly maple as the 735X.

Buy at Amazon