The author looked at 13 popular 3-hp, 220v 10-in. cabinet saws. In addition to evaluating the saws for power and safety, he also tested for tabletop flatness, for runout at the arbor shaft and arbor flange, and for parallelism of the blade to the miter slot. He found that all the saws offered plenty of power, solid rip fences, smooth controls, and flat tabletops. But the Powermatic PM2000 goes even further. It has an easy-to-change riving knife and a good blade guard. The shut-off switch is especially easy to reach with the knee, and the tabletop is the second largest in the test group. Furthermore, it’s the only saw that includes retractable casters (although lowering them required a lot of effort, a problem that is being corrected on newer models). An extension table and legs are included. The Powermatic PM2000 tied with the SawStop for author’s choice of best overall.
Fine Woodworking Recommended Products
Ridgid EB4424 Oscillating Spindle/Belt Sander
With five spindles sized from 1/2 in. to 2 in. and a 4 X 24-in. belt, this sander has become a staple in many a shop Fine Woodworking visits.
While all five of the smaller units will collect chips efficiently when deployed properly, the 3/4-hp Rockler was just a bit more powerful in our suction test. Bag changes were very easy too, thanks to a lip on the lower edge of the
canister, which holds the bag in place while you operate the clamp. The Rockler 650 also hangs very solidly on its bracket, which helps when you turn the filter-cleaning crank.
The DeWalt 735X produced two faces perfectly parallel to one another, with surfaces far superior to what the other machines produced, thanks to its two feed speeds. At high speed, the planer works fast and leaves a smooth surface. But the slower, finish speed produces an almost glass-smooth surface. Knife changes are easy, with spacious access to the cutterhead from the top and a gib screw wrench that doubles as a magnetic lift to remove the knives. The 735X also has great dust collection, thanks to an internal blower that helps evacuate chips. The port has a 2-1/2-in.-dia. opening, but has a built-in adapter for 4-in.-dia. hoses. My only complaint is the location of the dust port. It’s on the outfeed side of the machine, and exits straight back. If you don’t pull the hose to the side, it interferes with material as it leaves the machine. The top is large and flat, so it’s a great place to set material in between passes through the machine.
The thick, felted bag on this Shop Fox is a plus and a minus. On one hand, it makes the unit much less expensive than collectors with canister filters, and also lighter and easier to hang on the wall. Without a separate plastic bag to catch chips, however, they stay in the felt bag, and the shortish zipper on the bottom makes it tough to shake them out. Otherwise, the W1826 is an excellent value.
With its graceful curves, cabriole legs, and ornamental back splat, a Queen Anne side chair is a bucket list build for many woodworkers. Dan Faia had a very specific Queen…
Become an UNLIMITED member and get it all: searchable online archive of every issue, how-to videos, Complete Illustrated Guide to Woodworking digital series, print magazine, e-newsletter, and more.
Log in or create an account to post a comment.
Sign up Log in