• PRINT
  • ADD TO FAVORITES
  • Pin It
Pinless Moisture Meter CT 100

Electrophysics - Pinless Moisture Meter CT 100

A no-pin moisture meter with LCD display and low-battery indicator.

$198 (As of 6/1/2002)

Be the first to review this Tool

Editor's Review: Moisture-Meter Survey

by Lon Schleining

review date: June 1, 2002

The most common problems caused by moisture in wood are finishes that don't stick, joinery that breaks apart, and boards that take on new and unwanted shapes after milling. The solution to all these problems is to use wood that has been dried to the right moisture content, between 8% and 12%. And the easiest way to determine moisture content is to use a moisture meter.

Moisture meters use either pins or an electromagnetic plate (pinless) to measure moisture. Some pin-style meters take deep readings with hammer probes; others take readings from 5/8 in. or less. Both styles leave marks. Pinless meters leave no marks but require the wood surface to be smooth; they detect moisture down to about 5/8 in. I looked at a dozen meters priced from $60 to $350 and was surprised to find that their overall accuracy is quite good.

For species correction, the Electrophysics CT 100 one has a reference chart that provides a number to set the meter to so you can get an accurate reading. The optional calibration plates are fragile and require careful handling, but they arrived packed in a simple sandwich bag. The meter could use even a simple case.

 

read full review

Editor Test Results:

Quality N/A

Manufacturer Specifications

Manufacturer Electrophysics
Manufacturer's Web Site www.electrophysics.on.ca
Manufacturer's Phone Number 800-244-9908
Special Features Species Correction: Chart/internal
Product Warranty 2 years

Click on a thumbnail to see a full sized image

Become a Better Woodworker

Save up to 52% on Fine Woodworking