tag: WorkBench


showing 1 - 20 of 266 posts
 1 2 3 Next >  Last
Sort By:


Subscribe to RSS feed
Moxon on the cheap

Moxon on the cheap

I saw an attractive design in an earlier gallery post and decided to put one together using some surplus 8/4 maple. Despite conventional wisdom, I actually had a couple of spare 3/4" pony pipe clamps...

view details
The last workbench I will ever build

The last workbench I will ever build

2 comments

Like many others, I felt it was time for a workbench upgrade, likely this would be the last bench I build and wanted it to be unique. The design is my own, incorporating many features from my...

view details
Benchtop Bench

Benchtop Bench

1 comment

Based on FWW article by Steve Latta. I highly suggest anyone over age 40 build one.  Very back & eye friendly. This thing has a ton of uses, I use it every time I'm in the shop.  Light planing...

view details
Hybrid Tool Chest, Part III

Hybrid Tool Chest, Part III

Correcting some issues and adding an interior to this East-meets-West tool box.

view details
Split Roubo Workbench

Split Roubo Workbench

6 comments

This is my split roubo bench made entirely from reclaimed barn oak. It is 3' X 7'. The center boxes can be removed for additional clamping, the boxes can also be flipped over for entire bench to be...

view details
Roubo Workbench

Roubo Workbench

5 comments

White oak roubo. Lie-Nielsen tail vise, benchcrafted leg vise.

view details
My Wood Shop

My Wood Shop

Work in progress everyday.  Will it ever be perfect?

view details
My First Classic Workbench

My First Classic Workbench

1 comment

I waited to build this bench when I was confident with my woodworking capabilities.  I honestly should have built a easier way before this one, but I really knew what kind I wanted and just waited...

view details
The Woodworking Shows, Northeast.

The Woodworking Shows, Northeast.

2 comments

Vendors, instructors, and waves of woodworkers gather in Springfield, Mass.

view details
Leather Lined Vise Jaws

Leather Lined Vise Jaws

I recently posted a question to Shop Talk Live #74 about the pros/cons of lining vise jaws with leather. Mike Pekovich made two important points. Don't line the rear jaw of the front vise, because...

view details
Garage Workbench

Garage Workbench

I made this work bench out of pine boards and lumber.

view details
Workbench

Workbench

2 comments

Finally I got around to building a proper workbench. I used reclaimed maple and mansonia timbers for the structure and the top. The sides are completed with thick plywood and are coloured. As vises I...

view details
Moxon vise

Moxon vise

I recently completed my moxon vise. It is made of hard maple. I made a table top and drilled some 3/4" holes where I can use Veritas bench pups to clamp stuff on top. I bought an acme threaded rod...

view details
Black (and very green) locust workbench

Black (and very green) locust workbench

5 comments

The wood here is black locust, cut from a single tree - and very green when I got it into my garage shop and started working it several weeks back.   In fact, to quote Noel Coward (or was it Cole...

view details
Portabench

Portabench

5 comments

This was a design I came up with to use my beech slab, temporarily, in my front workroom.  In stark contrast to my usual engineering methods the design became more complex as I went along.  The top...

view details
Small Bench for Tablesaw

Small Bench for Tablesaw

I built this bench to fit between the rails of my Tablesaw. I used wood from three 8' pallets for the majority of the frame and finished the skirt and one strecher with maple. The joinery is mortise...

view details
Mirka Random Orbital Sander Recall

Mirka Random Orbital Sander Recall

Electrical short poses potential fire hazard for tool owners.

view details
Salt and Vinegar: Natures Rust Remover

Salt and Vinegar: Nature's Rust Remover

6 comments

Some common household and shop items can turn your rusty planes into everyday users.

view details
WORKBENCH Not So Big /Matts Monster  hybrid

WORKBENCH Not So Big /Matt's Monster hybrid

4 comments

I made this workbench, my first, as a hybrid design based on the Not So Big workbench and Matt's Monster Workbench. Both appeared in FWW. The bench base is locally harvested Douglas Fir. The top is a...

view details
NEW  STYLE LEG VISE AND WORK BENCH

NEW STYLE LEG VISE AND WORK BENCH

2 comments

I developed a new leg vise that uses a type one lever instead of the old type three lever design that has been around for hundreds of years . The vise has no crank handle or wheel it is operated with...

view details
showing 1 - 20 of 266 posts
 1 2 3 Next >  Last

Advertise here for as little as $50. Learn how

Save up to 51% on Fine Woodworking

 

Become a Better Woodworker

Join Woodworkers Like You

373917 woodworkers have joined Fine Woodworking. Create your profile and join the Fine Woodworking community!

28ford 28ford
joined May 24
Jack63 Jack63
joined Jan 24
Anthonyfee Anthonyfee
joined May 20

dragon3870 dragon3870
joined May 14
user-3553635 user-3553635
joined Jul 1
PeterHowell PeterHowell
joined Sep 5


Create your profile now!