I loved John’s mahogany credenza and saved that magazine article for guidance one day. My wife asked for a walnut credenza/server for our dining room and I used John’s design for guidance. Instead of using my Lamello biscuit joiner I used my Festool Domino Joiner for all of the mortise and tenon joints. The hinges, door pulls and ball catches were from Brusso. The interior was finished with a thin coat of shellac, the exterior was finished with 4 coats of Minwax Wipe On Poly Satin finish followed by paste wax.
Of the planers with two-knife cutterheads, the Makita produced the best surface quality. The knives are very narrow and a bit tricky to change, but Makita provides two magnets for lifting them off the cutterhead, and these make it easier. The machine’s dust port is an odd size, with an outside diameter of approximately 2-7/8 in. I used an adapter to connect it to a 4-in.-dia. hose, but dust collection was only fair. Finally, a full revolution of the height-adjustment wheel moves the cutterhead 3/32 in. The other machines move 1/16 in. with a complete revolution of the handle, a dimension that’s much easier to work with because the most common thicknesses for furniture are in multiples of 1/16 in.
Spacing: Fixed Stock width (max.): 12 in. Stock thickness: 1/4 in. to 3/4 in. for through-dovetails (tails board can be 1 in. thick); 1/2 in. to 1-1/8 in. for half-blinds Half-blind depth: 3/8 in.
With its graceful curves, cabriole legs, and ornamental back splat, a Queen Anne side chair is a bucket list build for many woodworkers. Dan Faia had a very specific Queen…
Become an UNLIMITED member and get it all: searchable online archive of every issue, how-to videos, Complete Illustrated Guide to Woodworking digital series, print magazine, e-newsletter, and more.
Log in or create an account to post a comment.
Sign up Log in