David Heim and Greg T. Gordon
Like any shop machine, a tablesaw can go out of alignment, producing cuts that aren’t square. In this video, John White shows how to use a short block of wood as a gauge to determine if the blade is parallel to the rip fence. He also explains the adjustments you’ll need to make to bring everything into proper alignment.
Fine Woodworking Recommended Products
Oneida’s Super Cell Dust Collector
30-Gal with Wall Mount
DeWalt 735X Planer
The DeWalt 735X produced two faces perfectly parallel to one another, with surfaces far superior to what the other machines produced, thanks to its two feed speeds. At high speed, the planer works fast and leaves a smooth surface. But the slower, finish speed produces an almost glass-smooth surface. Knife changes are easy, with spacious access to the cutterhead from the top and a gib screw wrench that doubles as a magnetic lift to remove the knives. The 735X also has great dust collection, thanks to an internal blower that helps evacuate chips. The port has a 2-1/2-in.-dia. opening, but has a built-in adapter for 4-in.-dia. hoses. My only complaint is the location of the dust port. It’s on the outfeed side of the machine, and exits straight back. If you don’t pull the hose to the side, it interferes with material as it leaves the machine. The top is large and flat, so it’s a great place to set material in between passes through the machine.
Shop Fox W1826
The thick, felted bag on this Shop Fox is a plus and a minus. On one hand, it makes the unit much less expensive than collectors with canister filters, and also lighter and easier to hang on the wall. Without a separate plastic bag to catch chips, however, they stay in the felt bag, and the shortish zipper on the bottom makes it tough to shake them out. Otherwise, the W1826 is an excellent value.
Veritas Precision Square
This precision square is incredibly versatile, from checking squareness to dialing in machine setups.
Rikon 10-3061 10-in. Deluxe Bandsaw
The 1⁄2-hp motor has all the power needed to resaw at its maximum capacity of 5 in.
The saw has two speeds: 3,280 sfpm (surface feet per minute) for wood and 1,515 sfpm for soft metals and some plastics.
Log in or create an account to post a comment.
Sign up Log in