Replies

1. 
   blopar | Feb 16, 2011 08:46pm | #1

   I retrofitted my collector with a cyclone and because of that added a pleated filter from wynn environmental, they were great to work with and answered any questions I had. It looks like the 35A series filter would be what you are looking for but I would call, their number is 215.442.9443. I got the nano fiber filter and am amazed at how much the collector captures, I no longer have that ever present coating of ultra fine dust on every surface in the shop.

   Good luck

1. 
   Woodk | Feb 17, 2011 12:17pm | #2

   thanks for the response, blopar.  Yeah, I already called them.  Very nice folks.  I just wondered if any guys out here had any firsthand experience.  I'm a little worried about cleaning the filters.  Without the flapper, it seems that cleaning them can be kind of a pain.  I do have a separator which I would think might help keep it clean. 

   thanks again

2. 
   woodhacker | Feb 17, 2011 09:18pm | #3

   cleaning the filter

   On my Oneida cyclone with a pleated filter I simply use an air hose to blow on the outside of the filter, knocking the accumulation of the dust from the inside of the filter where it  then falls to the can on the bottom. I'd think this should work for the filter you have in mind.