I was told this is some form of maple. I am not so sure… It was harvested off of a friend’s property outside of Atlanta GA. Any ideas?? I have quickly sanded it and wiped down with naphtha
Fine Woodworking Recommended Products
- Initial static pressure (in. of water): 78 - Static pressure with bag 2/3 full: 75 - Noise level (db): 80 - Disposable filter bags (5 pack): $70 - Reusable bag avail. from mfr.: No - Hose length (ft): 11 - Cord length (ft): 24
Automatic Vacuum Switch
New Generation LED digital tube display. 3 vacuum run modes. Adjustable vacuum startup and shutdown time in vacuum auto mode. Controller, tool and vacuum run LED indicator. All controller designs make your work more intelligent, convenient and safe.
Whiteside Slot Cutter 6710A 3-Wing (1/4") Slotting Cutter Router Bit .250"
- Carbide tips cut spline joints in solid wood, plywood, and particle board - Kerf 1/2" deep - Cutters require arbor to operate
Veritas Micro-Adjust Wheel Marking Gauge
The adjuster runs through the beam from a small knob at the back end right to the cutting wheel, which moves in and out as you turn the knob. This arrangement works well but makes adjustments a two-handed operation, requiring a little more effort.
Lie-Nielsen No. 102 Low Angle Block Plane
With smooth, precise adjustments and wonderful balance, this compact block plane is a joy to use. It doesn’t have any bells and whistles, but there’s not a better block plane available for the money.
Replies
It looks like spalted maple.
This forum post is now archived. Commenting has been disabled