Replies

1. 
   Samson | Jun 22, 2005 06:52pm | #1

   http://home.pacbell.net/jdismuk/sawdust.html

2. 
   gsails | Jun 22, 2005 11:55pm | #2

   I used a piece of plywood with an adjustable toilet flange and plastic elbow on the bottom of my contractors saw. The flange let the elbow turn to where I needed it. A strip of wood, about an inch and a half thick, at the back of the saw seemed to divert most of the dust down the elbow and didn't interfere with the tilt of the saw. Hope this helps. Gary Greim

1. 
   Fiddler | Jun 26, 2005 05:39am | #3

   Thanks for the great ideas and the link with pics. That is the route I am going to take - port on thr ight side and the plastic back should work for me. Thanks again.