Without getting in to too much initial detail, is anyone on here versed in calibrating a Martin T-20’s digital height adjustment?
The gist of my underlying questions being that I can’t quite seem to figure it out.
I’ve referred to the manual and there is little to no information on how to do this.
Anything helps, thanks.
Fine Woodworking Recommended Products
Dubuque Clamp Works Bar Clamps - 4 pack
These clamps are as premium as their price is, but they're worth every penny. A few staffers have a small collection and they're almost always the first clamp they reach for.
Liberon Steel Wool
Perfect for rubbing out a finish for a low-luster sheen.
Chicago Electric Belt Sander
Weight: 7 lb. Amps: 6 Variable speed: Yes Belt alignment: Good Material removal rate: Fair Sanding flatness: Very good Shaping/scribing: Good Handling on side: Very good Dust collection with hose: N/A
Grout float
The red foam on these grout floats grip well to wood, and the large handle keeps your hands safely away from bits and blades.
Leigh D4R Pro
The D4R Pro is Leigh’s flagship jig. Like the other Leigh jigs in our test, it represents a different world of quality, from its clear, comprehensive instructions to its ingenious engineering, impeccable manufacturing, and unmatched capabilities.
Replies
I’m actually in the process of getting a T20 set up in my shop. I can’t help right now, but will check back here once I do. Is your machine a duo control model?
The folks at Martin are great. They will help you out.
As with anything Martin, its not an easy process but once you get it dialed it, it is DIALED IN and stays that way FOREVER.
Their US office # is 704-921-0360.