Replies

1. 
   GEide | Nov 26, 2008 11:07pm | #1

   Dear Mr. Antonacchio,

   Thanks for your question. We'll get a response for you shortly.

   Thanks, Gina

   FineWoodworking.com

2. 
   MKenney | Nov 27, 2008 02:47am | #2

   Bill,

   Thanks for your question. I edited that article and I'll give John a call next week (we're closed for Thanksgiving) and ask if he remembers the blade.

   Matt K.

   This is my personal signature.
1. 
   BillAnton | Nov 27, 2008 02:36pm | #3

   Thanks, Gina and Mark and have a good Thanksgiving Day!Regards,
   Bill Antonacchio

1. 
   MKenney | Dec 02, 2008 04:55pm | #4

   Bill,I spoke with John and here's what he told me. He bought his blades from Garrett Wade. So you can check there. He then advised that if you can't find what you're looking for pre-made, just buy a bandsaw blade with the desired number of teeth, hook, and width and make one yourself. Just cut it to length, and then drill the necessary holes so it can be mounted in your bowsaw frame. I did that for a frame saw I made and it's not that hard.Hope this helps. Good luck. Matt K.This is my personal signature.

1. 
   BillAnton | Dec 02, 2008 10:55pm | #5

   Thank you Matt and please pass on my thanks to John. I will investigate Garrett Wade, but like the idea of using a bandsaw blade.Regards,
   Bill Antonacchio