Replies

1. 
   JohnWW | May 14, 2009 04:08pm | #1

   Try this:

   http://www.advmachinery.com/manuals/Zvise.pdf

   John White
   Shop Manager for FWW Magazine, 1998-2007

1. 
   ScruffyShoppe | May 14, 2009 08:55pm | #2

   This pictorial helps tremendously!   I can use many of the set-ups.  There was nothing on the box that said Z-vise.   Is there a company in US that is still producing and maintaining Z-vises?

   This information definitely makes my subscription worthwhile.  I have used your site to find info and learn about the tools I am using.  I have used many of these tools in Industrial sizes and settings - handling home shop tools that are not guarded or supervised has been daunting.  I ran a ripsaw for 6 years along with bandsaws, chopsaws, tenoners, mortisers, pneumatic sanders, etc., and still have all my fingers and toes. I want to keep it that way.  Plus I have a small shop, 8x12 with a low ceiling, and need to have versatile, mobile set-ups.  Your publications have given me many useful ideas and techniques.  Thank You! Christi B

2. 
   jabe | May 14, 2009 09:13pm | #3

   Hi, read your mesage! I have a Gripmaster instruction manual. If you send me your address :Ill copy it and mail it to you.

                                                  Regards

                                                 Jabe

1. 
   ScruffyShoppe | May 15, 2009 12:08am | #4

   I prefer not giving out my address as it is my home.  Could you scan it & email it? or link it to an email?  Thanks Christi

1. 
   jabe | May 15, 2009 02:06am | #5

   Hi,

      The manual is 16 pages. If you have a fax # ill try to copy and fax it to you

                                   Jabe

1. 
   beckyjean | May 04, 2010 02:24pm | #7

   Gripmaster

   or fax # 229/430-6416

2. 
   beckyjean | May 04, 2010 02:20pm | #6

   Gripmaster manual

   I desperately need a copy of your manual, if the offer still available.

   address:

   Barrett

   1307 10th Ave.

   Albany, GA 31707

1. 
   Asynnott | Feb 12, 2014 09:52am | #8

   Gripmaster manual

   Are you still looking for a GripMaster manual?  I just came accross you old post.  I can scan it and email it to you if you like.

1. 
   SeaofGreen | Feb 16, 2014 05:46pm | #9

   I just received one of these Gripmaster clamping systems and I have learned a bit about how to use them by looking at Z-vise videos, but if you have the ability to scan and email me a copy of your Gripmaster manual, it would be greatly appreciated.  [email protected].

   Thanks!

3. 
   jonno1944 | Dec 20, 2016 11:23am | #10

   Help

   Only just joined the site( it was recommeded by a friend ) and saw your post about the manual for the Gripmaster if you still have it could you do me a big favour and supply me with a copy???  Regards John