I’m “new” here so I’m asking if anyone had built Greene And Greene floor lamps and lampshades? I’m sure the base and post shouldn’t be any difficult but I’m kinda lost on the shade angle cutting plans..
Fine Woodworking Recommended Products
Blackwing Pencils
If you've listened to Shop Talk Live, you've heard them talk more about these pencils than you could possibly imagine.
Grizzly G0785
Seemingly identical to the Shop Fox W1844, the Grizzly G0785 collected a few less chips in our test—but was still roughly average among the five small models. Emptying was easy, thanks to a bag that stays in place on the canister while you operate the band clamp, which also works well. Both units hang well on their brackets.
Leigh D4R Pro
Spacing: Variable Stock width (max.): 24 in. Stock thickness: 1/8 in. to 1 in. for through-dovetails (pins board can be 1-1/4 in.); 1/8 in. to 1 in. for half-blinds Half-blind depth: 3/16 in. to 3/4 in.
Ridgid Oscillating Spindle
With five spindles sized from 1/2 in. to 2 in. and a 4 X 24-in. belt, this tool sander has become a staple in many a shop Fine Woodworking visits.
Black & Decker Dragster, DS321 Belt Sander
Weight: 6.5 lb. Amps: 7 Variable speed: No Belt alignment: Poor Material removal rate: Poor Sanding flatness: Very good Shaping/scribing: Good Handling on side: Very good Dust collection with hose: N/A
This post is archived.