Replies

1. 
   rsaunders | Apr 01, 2008 03:13am | #1

   I took the table off, removed the cogged belt, lowered all the jackscrews to the bottom, set them all to the same height with a dial indicator, replaced the belt and table and was good to go.

   "There are men in all ages who mean to govern well, but they mean to govern. They promise to be good masters, but they mean to be masters."
   -- Daniel Webster

1. 
   87bluejay | Apr 01, 2008 04:55pm | #2

   Thanks for the reply.  Is this something you did just once?

    

1. 
   rsaunders | Apr 01, 2008 05:39pm | #3

   Just once. As long as the cogged belt does not slip the adjustment is permanent. A side benefit of doing it this way is the handwheel turns very easy when raising or lowering the table. As you have probably noticed, when the table is cocked the wheel is difficult to turn."There are men in all ages who mean to govern well, but they mean to govern. They promise to be good masters, but they mean to be masters."
   -- Daniel Webster