Replies

1. 
   IMERC | Aug 08, 2003 07:22pm | #1

   Bendy??? As in flexable? Whatcha trying to do?

2. 
   forestgirl | Aug 08, 2003 07:24pm | #2

   Boulter Plywood http://www.boulterplywood.com/product.htm carries bending birch plywood (look on the above page under "Specialty Plywood".  I didn't see anything about bending MDF, but you could call them.  The are in MA, homepage is http://www.boulterplywood.com/ .

   Also, try a Google search http://www.google.com using "bending plywood" as your first search string.

   forestgirl -- you can take the girl out of the forest, but you can't take the forest out of the girl   ;-)

3. 
   MichaelLomax | Aug 09, 2003 01:58am | #3

   The bendy MDF I have seen is about a 1/4 inch thick and kerfed on one side. 

   While they don't stock it, my local lumber/plywood supplier can get it if I ask for it.   Try calling around to your local plywood suppliers.

   Lomax

4. 
   wrick2003 | Aug 09, 2003 06:46am | #4

        You might want to look for 3/8" fir bend- plywood. The veneers grains are all oriented in the same direction.       rg

5. 
   RANGERP75R | Aug 10, 2003 08:06am | #5

   Anderson

      I used bending ply for a sustrate on a round custom parts counter I made recently. It comes in 1/4" an 3/8". Can get it it so all the grain runs vertical or horizonal. Some call it wiggle board. We have two sources in the Atlanta area I am aware of. I suggest you call or drop by a local cabinet shop an ask. I bet they can direct you locally...

   sarge..jt