Replies

1. 
   salamfam | Jan 10, 2010 10:13am | #1

   I think that a reasonable method would be to simply rinse it from the "clean" side with a hose and set it aside to dry.

1. 
   joeintopeka | Jan 10, 2010 12:37pm | #2

   That seems like the most reasonable course to me. But I thought I'd better check to see if there would be someone who would scream NO! You'll ruin it if you don't use Frammel cleaner and a 0000000 wire brush!

   No one yet. Thanks for the reply>

1. 
   Jimma | Jan 10, 2010 02:35pm | #3

   I would wash it from both the inside and outside using a fine spray that isn't too strong. If you notice the inside has a reinforcing mesh that holds the filter fabric in place, I would start with it and gently spray the dust to the outside for removal, then repeat. Make sure it's washable.

2. 
   GRW | Jan 10, 2010 04:22pm | #4

   I have one. Just rinse with water and let dry. I've had mine for about 5 years and it still works and looks fine.

1. 
   joeintopeka | Jan 10, 2010 11:48pm | #5

   Thanks everybody. That's
   Thanks everybody. That's about what I thought. Just being cautious.