Replies

1. 
   CRAIGCONEY_M | May 08, 2004 08:22am | #1

   I've used the old senco model and the just purchased the Finish pro 10.  Both seem to work fine.  I haven't had one jam on me yet. 

2. 
   jazzdogg | May 09, 2004 04:04am | #2

   Steveworks,

   I got a deal on the Porter Cable and it's worked well for me. By the way, it accepts Senco's "pins"

   -Jazzdogg-

   Whether you think you can, or you think you can't, you're right.

1. 
   sawduster | May 09, 2004 06:23am | #3

   I've had the Senco for a few months and used it on a few projects without any jams or other problems.  I've used avery lenght pin they have during that time and think you would be happy with the purchase.

3. 
   steveworks | May 10, 2004 03:58am | #4

   Thanks to you all.  I've got too mnay Porters,  I'll go for the Senco

1. 
   AlanTurner | May 11, 2004 12:05am | #5

   I have the Senco 23 ga. pin nailer, and mine did jam.  Took a month to have it serviced and returned, under warranty, at a local authorized repair shop.  Problem was that there is a magnet at the tip, and so if there are too few nails left when you take them out at the end, then a few can stick, and can get crooked, and you can't fix it yourself.  Solution is to shoot out the last few into the trash.  Since I have been doing that, no problems.

   AlanAlan

   http://www.alanturnerfurnituremaker.com