Furniture Construction

with Bob Van Dyke

Learn an old machinist's secret to verify the accuracy of your work.

with Bob Van Dyke

Learn how to use a story stick to accurately repeat cuts and map out joinery for an entire project on one piece of wood. Measure once and cut 100 times!

with Andy Rae

An easy method for installing these durable hinges using a combination of hand- and power-tool skills

with Andy Rae

How to make a frame with a simple variation on mortise-and-tenon joinery. Watch how to make a haunched tenon on the tablesaw and cut mortises with a router.

with Andy Rae

Andy Rae takes you step-by-step through the process, from setting up the router bits to final glue-up.

with Asa Christiana

The families trade keys, the designers make plans, and the crew gets very, very busy

with Asa Christiana

It's time for the reveal. See what the crew accomplished in a day.

with Kevin Rodel

In this 3-part video, Kevin Rodel demonstrates all the steps to creating leather cushions for his prairie settle. Here, in Part Two, he shows how to cut the hides and punch them for the lacing.

with Kevin Rodel

In this 3-part video, Kevin Rodel demonstrates all the steps to creating leather cushions for his prairie settle. Here, in Part Three, he shows how to lace the hides over the cushions' padding.

with Kevin Rodel

In this 3-part video, Kevin Rodel demonstrates all the steps to creating leather cushions for his prairie settle. Here, in Part One, he shows how to weave nylon cord to make webbing to support the seat cushions

with Andy Rae

What are your options when the wood you want to use is wider than your jointer? Andy Rae shows you how to flatten a large plank with portable tools and winding sticks.

with Chris Gochnour

The wall cabinet comes together, with drawers glued up and trimmed, and the back fitted in place

with Chris Gochnour

Take your joinery to a new level by learning how to make handcut dovetails. See how it's done in the latest episode of this online classroom

with Chris Gochnour

In this installment of our online classroom, Gochnour explains how to lay out and cut the tails for a through dovetail joint

with Chris Gochnour

Complete the joint by laying out and cutting the pins. Gochnour shows how it's done in this episode of our online classroom